Date of File - 12/07/92 Version 1.20 File changes flagged with |'s Original File Date - 06/08/92 Owner, Irv Spalten, IRV @ BCRVMPC1 ****************************PLEASE NOTE*************************************** PACKAGE FILES ARE LISTED IN THE BBS WITH A ZIP EXTENTION UNLESS OTHERWISE SPECIFIED. ****************************************************************************** This is the list, as of the date shown above, of all fixes placed by Department 17J on either OS2CSD or OS2TOOLS. Other 2.0 fixes are not supported by the Boca Technical Group. All fixes listed here may be distributed externally. The difference between OS2CSD and OS2TOOLS is that OS2CSD is for fixes, and the individual files will be removed when a service release is done. The service release will then be placed on OS2CSD in its place. OS2TOOLS will hold 'enhancements' and utilities for OS/2 2.0. All fixes are on External BBS's and CIS except where noted. In some case the EXTERNAL name may be different and is so noted. When the names are the same, external names have the ZIP extension. NOTE: Access to IBM's OS2CSD and OS2TOOLS repositories is available to IBM personnel only. APAR = Authorized Program Analysis Report (or bug report) PTR = Program Trouble Report (or bug report) *********************** * Fixes on OS2CSD * *********************** NOTE: APAR numbers are the numbers the LATEST fix was reported under. Components like OS2KRNL may have many APAR fixes and reports against it. |****************************************************** | |Package Name - UHPFS (In Directory #17 on this BBS) | |A new CHKDSK for fixing the CPS:EXTENTS problem. See DOC |file in ZIP on how to install, use with SP level of code. | |****************************************************** | |Package Name - SP16MB (In Directory #17 on this BBS) | |Fix for machines with over 16MB that are not having the |memory recognized. | | |****************************************************** | |Package Name - DBPREP (In Directory #10 on this BBS) | | |DBPREP is a utility to allow DOS 4.0, DOS 5.0, and DR DOS to be installed |as a dualboot function on top of OS/2 2.0, and recover to OS/2 in case |something goes wrong during the DOS install. | |Since, DOS can only exist on an active primary partition, the DBPREP |utility should only be used if OS/2 is located on the C: partition. | |See README.DBP in the ZIP file for full usage details. | ****************************************************** Package Name - SBMMPM (In Directory #17 on this BBS) This is a PRE-RELEASE set of drivers for MMPM/2 only. CONTENTS OF THIS RELEASE ======================== This release contains the following Sound Blaster device drivers: DD Name Description --------- ----------------------------------------------- SBD2.SYS Sound Blaster Wave plus MIDI OS/2 Device Driver SBPD2.SYS SB PRO Wave plus MIDI OS/2 Device Driver SBP2D2.SYS SB PRO OPL/3 Wave plus MIDI OS/2 Device Driver SBW2.SYS Sound Blaster Wave-Only (aka K12) OS/2 Device Driver SBPW2.SYS SB PRO Wave-Only (aka K12) OS/2 Device Driver * --------- ----------------------------------------------- * The SBPW2.SYS device driver also supports PRO OPL/3. DEVICE DRIVER REQUIREMENTS ========================== To use the Sound Blaster device drivers, you must have IBM Multimedia Presentation Manager/2 (MMPM/2) installed on OS/2 2.0. For more information about MMPM/2 and OS/2 2.0, contact your local IBM representative or your Authorized Remarketer; or call the IBM Multimedia Information Center at 1-800-426-9402, extension 160. ****************************************************** Package Name - ADDPRT (In Directory #10 on this BBS) PJ03668 : Printer setting under Win-OS2 doesn't work properly. This fix requires the following file(s) to be copied to your OS/2 2.0 system hardfile. Filename Size Date Time CONTROL.EXE 162960 9-02-92 6:23p ****************************************************** Package Name - LS20FX (In Directory #4 on this BBS) |Updated on 9/30 with additional install details. --- FIXES FOR OS/2 2.0, LS 2.0 LAN Requester --- August 19, 1992 LS 2.0 DOS LAN Requester APARs: IC03578, IC03862, IC03994, IC04026, IC04196, IC04290, IC04355, IC04356 SYSTEM: OS/2 2.0 GA, LS 2.0 GA Modules: \IBMLAN\NETPROG\NETWKSTA.200 \IBMLAN\SERVICES\WKSTA.EXE \IBMLAN\SERVICES\WKSTAHLP.EXE \IBMCOM\MACS\IBMTOK.OS2 CORRECTS: In general - 1. Problems detecting and reporting network errors. 2. Problems using named "pipes" over LAN connected systems and applications. 3. Accessing and using a server with IBM PCLP (PC LAN Program). 4. Problems using COPY and XCOPY to the server. 5. Sharing violations on SWAPPER.DAT with RIPL workstations (Remote IPL with SWAPPER.DAT on server). 6. RIPL Workstations hanging during Remote IPL. Specific - 1. Problems detecting and reporting network hardware errors. NETWKSTA.200 was changed to allow INT24 to be hooked to received hard errors on network drives. ** NOTE ** To enable this, wrkheuristic 30 must be set to 9. 2. NETWKSTA.200 and the WKSTA.EXE were fixed for problems associated with adapter lobe faults. 3. The OS/2 2.0 API call DOSSetFileLocks was not included in the GA release of LS 2.0. Applications using the older 16 bit API call DOSFileLocks and DOSFileIO were not affected. Applications issuing the 32 bit DOSSetFileLocks receive a return code of 174. 4. Added code to handle FS_FILELOCKS but it will not accept atomic requests without the new SMB. Also will not accept FS_CANCELLOCKREQUEST without the new SMB. 5. Corrected problem with doing DOSOPEN on a named pipe connecting LAN systems or applications. 6. Problems using COPY and XCOPY with PCLP servers. 7. The "WRITE" command returning an error "6" when writes are attempted to a PCLP server. 8. Corrects NET3126 errors occurring when accessing a PCLP server. 9. Corrects problem with Database applications receiving bad return codes and UNLOCK errors when redirected. 10. Corrects problem with COPY when a network resource has read and write permission but not "A" permission; resulting in error messages of "INCORRECT FUNCTION" and "0 files copied." Correct message is now generated, SYS0065 "Network Access Denied". 11. Problems re-establishing RIPL sessions due to incorrect file handles being connected to SWAPPER.DAT. 12. Timeouts and retries during Remote IPL redesigned to prevent RIPL hangs. 13. RIPL initialization changed to prevent RIPL hangs. CONTRADICTIONS: None known for OS/2 2.0. These fixes are specific to using the LS 2.0 LAN Requester and DOS LAN Requester on OS/2 2.0. There are some 32 bit API modules and calls included or referenced. This set of fixes should NOT be installed on any OS/2 1.3 system. If LS 2.0 is being used on an OS/2 1.30.2 system, DO NOT install this set of fixes. The LAN132FIX set of fixes should be used on all OS/2 1.3 SE and EE systems, including those with LS 2.0. INSTALLATION: After downloading the fix to a temporary directory (C:\FIX in this example) and UNZIPping the file, perform the following steps: 1. SHUTDOWN the system. 2. Insert the OS/2 2.0 Installation diskette. 3. Reboot 4. Insert install system diskette #1 when prompted, press Enter. 5. When the "Welcome to OS/2" screen appears, press Escape. 6. When the command prompt appears, switch to the system drive ("C:" in this example). 7. CD C:\IBMLAN\NETPROG 8. RENAME NETWKSTA.200 NETWKSTA.OLD 9. COPY C:\FIX\NETWKSTA.200 10. CD C:\IBMLAN\SERVICES 11. RENAME WKSTA*.EXE WKSTA*.OLD 12. COPY C:\FIX\WKSTA*.EXE 13. CD C:\IBMCOM\MACS 14. RENAME IBMTOK.OS2 IBMTOK.OLD 15. COPY C:\FIX\IBMTOK.OS2 16. Remove diskette and reboot with CTRL-ALT-DEL. Do NOT power off. 17. After reboot, Edit the file C:\OS2\INSTALL\INSTALL.LOG. 18. At the end of the file, add a line with: "IC03578, IC03862, IC03994, IC04026, IC04196, IC04290, IC04355, IC04356" 19. Save the file and exit the editor. 20. Repeat steps 1 to 19 for each requester system running OS/2 2.0. If the fix causes any new problems or unwanted side affects, repeat the above procedure but delete the new fix modules and RENAME the .OLD modules back to their original extensions; then reboot with CTRL-ALT-DEL. ****************************************************** Package Name - LS13FX (In Directory #4 on this BBS) |Updated on 9/30 with additional install details. --- FIXES FOR OS/2 1.30.2 LAN Requester --- August 19, 1992 DOS LAN Requester APARs: IC02757, IC03110, IC03431, IC03443, IC03508, IC03564, IC03571, IC03972, IC04163 SYSTEM: OS/2 1.30.2 or any 1.3 with CSD WR05050 or XR05050 applied. ** NOTE ** CSD 5050 must be installed prior to this fix. Modules: \IBMLAN\NETPROG\NETWKSTA.SYS \IBMLAN\NETPROG\RDRHELP.SYS CORRECTS: In general - 1. Problems using named "pipes" over LAN connected systems and applications. 2. Accessing and using a server with IBM PCLP (PC LAN Program). 3. Occurrences of TRAPs 0008, 000B, and 000D; or, system "hangs" on requesters and servers. Specific - 1. Performance problems when using named pipes between network systems and applications. 2. DOSREAD returns an error code 240 at the end of data from a named pipe. 3. Corrects TRAP 0008, CSLIM "EFCA" when a named pipe is used to transfer more than 3620 bytes between network systems or applications. 4. Corrects problem causing a TRAP 000B, CSLIM "B222" in certain network applications. 5. Corrects problem causing intermittent TRAP 000D, CSLIM "EFCA" on requesters and servers. 6. Corrects problems with Domain controller trapping or stopping when the requester is using Lotus 123G. 7. Fixes having files on a PCLP Server get the Archive flag set when accessed by a requester. 8. Fixes incorrect date and time set on files on a PCLP server after access from a requester. 9. Corrects problem with Database applications receiving bad return codes and UNLOCK errors when redirected. 10. Corrects problem with requester systems or applications using file locks on the server hanging or being unable to acquire the file lock; caused by files not being unlocked. 11. Corrects problem with requester systems or applications hanging when using "raw" read and write to files on the server that are shared. 12. Prevents the system abend occurring when a NET STOP is issued from a requester immediately after a NET PAUSE and NET USE were issued from the same requester. CONTRADICTIONS: CSD WR05050 (EE) or XR05050 (SE) must be installed prior to this fix. This fix is to be used with all OS/2 1.3 requester systems using LAN whether LS 2.0 or 1.3 EE LAN Requester is used. Do not install this fix on any OS/2 2.0 system. This fix should be installed on all requester and server systems using OS/2 1.3 (after installing CSD 5050). INSTALLATION: After downloading the fix to a temporary directory (C:\FIX in this example) and UNZIPping the file, perform the following steps: 1. SHUTDOWN the system. 2. Insert any OS/2 Installation diskette. 3. Reboot 4. Insert install system diskette #1 when prompted, press Enter. 5. When the "Welcome to OS/2" screen appears, press Escape. 6. When the command prompt appears, switch to the system drive ("C:" in this example). 7. CD C:\IBMLAN\NETPROG 8. RENAME NETWKSTA.SYS NETWKSTA.OLD 9. COPY C:\FIX\NETWKSTA.SYS 10. RENAME RDRHELP.SYS RDRHELP.OLD 11. COPY C:\FIX\RDRHELP.SYS 12. Remove diskette and reboot with CTRL-ALT-DEL. Do NOT power off. 13. After reboot, Edit the file C:\OS2\INSTALL\INSTALL.LOG. 14. At the end of the file, add the lines: "IC02757, IC03110, IC03431, IC03443, IC03508," " IC03564, IC03571, IC03972, IC04163" 15. Save the file and exit the editor. 16. Repeat steps 1 to 15 for each requester and server system using OS/2 1.3 with CSD 5050. If the fix causes any new problems or unwanted side affects, repeat the above procedure but delete the new fix modules and RENAME the .OLD modules back to their original extentions; then reboot with CTRL-ALT-DEL. ****************************************************** Package Name - OS2FLIST External Name - OS2FL.ZIP (In Directory #10 on this BBS) A list of all OS/2 2.0 files with the File name, Destination directory, and Description. Useful for deleting unwanted files. ******************************************************** Package 4029P (In Directory #9 on this BBS) 4029 POST SCRIPT FIX -------------------- 4029PFIX.EXE ------------ This program is used to fix problems related to using the PSCRIPT.DRV with IBM 4029 printer and getting prompted for needing 300.DRV or 600.DRV. This program need only be run once after installation of the 4029 postscript device for WINOS2. Filename Size Date Time 4029PFIX EXE 25345 8-28-92 3:10p README 1ST 894 9-01-92 1:51p ******************************************************** Package DPMI (In Directory #4 on this BBS) This package contains the fix(es) for the following reported APAR(s) : PJ04082 : MS C7.0 won't run in a VDM, DPMI is not fully compatible. This fix requires the following files to be copied to your OS/2 2.0 system hardfile. Filename Size Date Time VDPMI.SYS 20992 8-19-92 10:25p VDPX.SYS 22608 8-19-92 9:33p VNPX.SYS 2000 8-19-92 10:29p ******************************************************** Package SOMFIX (In Directory #17 on this BBS) Filename Size Date Time OS2386 LIB 615424 8-19-92 5:39p PMWP DLL 996549 8-19-92 10:11p README 1ST 2390 8-28-92 4:09p SOM DLL 69159 8-19-92 5:49p WPPRINT DLL 530297 8-19-92 11:26p This package contains a complete replacement for the SOM, PMWP, and PMPRINT. DLLs files provided with the OS/2 2.0 GA product. The new version of SOM.DLL contains changes to the dynamic class loading/unloading mechanism that have been found to provide better synergy with the Workplace Shell APIs for class registration. If you have noticed problems unloading and then reloading the DLL(s) for classes you have written, this version may provide better results. The PMWP.DLL contains fixes for WinCreateObject, WinSetObjectData and WinDestroyObject api calls that allow the programmer to create and maintain objects in the workplace shell. In particular, it is now possible to specify a setup string of >255 chars, environment strings in the setup string are now handled properly and a spurious failure mode for all of these apis has been fixed. In addition, it is now possible to copy a subdirectory containing a large number of files without error. PMPRINT.DLL has been modified to export various print related workplace shell object classes. OS2386.LIB contains exports for four different workplace shell object classes that were not exported in the GA product, such as the WPDesktop object class. If you intend to subclass workplace object classes,you must replace this lib in your toolkit library directory to avoid linker errors when building your code. ******************************************************** APAR PJ04052 - HPFS problems Package HPFS (In Directory #4 on this BBS) This is a fix for HPFS systems reporting problems with SWAPPER.DAT when running CHKDSK. It should also fix the CPS:Extents error too. README file is in the ZIP file for further instructions. Filename Size Date Time HPFS IFS 125520 8-28-92 3:07p README 228 7-13-92 11:09a NOTE: This fix MAY require a re-formatting of the partition. If your problems continues, please re-format. ****************************************************** PJ03939 : Cannot access the 360KB 5.25 inch diskette drive. Package Name - 360KFIX External Name - 360K.ZIP (Not available on this BBS right now) Note: Read the IBM1FLPY.TXT file for additional information about this fix. This fix requires two files to be copied to your OS/2 2.0 system hardfile. The file are IBM1FLPY.ADD and OS2DASD.DMD. Filename Size Date Time IBM1FLPY.ADD 24996 8-19-92 8:00p OS2DASD.DMD 32088 8-19-92 7:51p ******************************************************* Package Name - COMMGA (In directory #17 on this BBS) A new set of COMM drivers for OS/2 2.0. These are to be CONSIDERED Beta drivers. Please read the README.1ST file for more info. CMD files are included for installing and backing up the drivers. Read it before you use these drivers and the documentation for the drivers included. New DOS properties are defined in these drivers, and HELP is not available for these new settings on the screen, so keep the DOC handy. Also included is a form to fill out if you have a problem. Print the form and either mail it or FAX it to IBM. NOTE: A new MODE.COM is included that fixes the BUFFER= parameter. ******************************************************** APAR PJ03837 BLACK ICONS on Desktop PACKAGE name - BLKICO (In Directory #4 on this BBS) It fixes the BLACK ICON problems. You only need the PMGRE.DLL if you are NOT running with an XGA display. Copy both files to the OS2\DLL directory and shutdown and re-boot. NOTE: the above is different from the README file in the fix. Actually, you can install both files and NOT WORRY. Rather than update the fix, I have chosen to correct it here. Sorry for ANY inconvenience. ********************************************************** Package Name - IBM2FLPY External Name - PMTAPE.ZIP (In Directory #4 on this BBS) APAR: PJ03661 Filename Size Date Time IBM2FLPY.ADD 13029 5-15-92 1:38P This IBM2FLPY.ADD file contains fix for this problem: PMTAPE utility does not work. After restoring backup files from tape, the system would either hang the OS/2 WINDOW or halt the entire system. *********************************************************** Package Name - OS2KRNL External Name - OS2KRN.ZIP (In Directory #4 on this BBS) Filename Size Date Time OS2KRNL 716884 6-17-92 10:27a This KERNEL file contains fixes for these following problems: APAR PJ03686 / PTR B736191 PROBLEM SUMMARY: OS/2 2.0 Swapper.dat file does not shrink. APAR PJ03733 / PTR B752328 PROBLEM SUMMARY: When two or more processes perform DOSDELETE function to the same server using UNC file path names OS/ system will deadlock. The processes deadlocked include any DOS file I/O which require access to the same. APAR PJ04081 / PTR B735516 PROBLEM SUMMARY: IPE occurs at location 150:4912 which is a "rep stosd" inside the BlastSFT. (AUTOCAD problem) PTR AA04936 PROBLEM SUMMARY: System creates a data block for the unsuccessful attempt to open a file. PTR AA05235 PROBLEM SUMMARY: MEM.qlqresident and MEM.qlqfree constantly increase an never decrease. APAR JR05522 / PTR B736359 PROBLEM SUMMARY: When the server system is upgraded to LAN service 2.0, the system TRAP D intermittently at CSLIM:C27E, CS:230 and IP:0488. APAR PJ04635 / PTR B736621 PROBLEM SUMMARY: DOSRENAME not deleting source file (Cross link files problem). PTR B736650 PROBLEM SUMMARY: Increase DosRmDir integrity. ************************************************************ Package Name - VSVGA (In Directory #17 on this BBS) APAR: PJ03677 Filename Size Date Time VEGA.SYS 49207 5-15-92 1:47p VVGA.SYS 51678 5-15-92 1:47p VSVGA.SYS 64559 5-15-92 1:47p These files VEGA.SYS, VVGA.SYS and VSVGA.SYS contain fix for this problem: Entering a DOS or WinOS2 Full Screen on a Tseng et4000-based SVGA card with a batch number of TC6059AF or higher makes the video card go out of sync, requiring a cold boot to remedy. ******************************************************* Package Name - BVHSVGA External Name - BVSVGA.ZIP (In Directory #17 on this BBS) APAR PJ03721 Filename Size Date Time BVHSVGA.DLL 22466 5-15-92 12:26p The file BVHSVGA.DLL contains fix for this problem: OEM machines with Western Digital super VGA video that have 1 Mg of video memory crash after first boot then the C0000005 message occurs. ****************************************************** Package Name - IBM1S506 External Name - IBM506.ZIP (In Directory #4 on this BBS) APAR PJ04045 Filename Size Date Time IBM1S506.ADD 13036 5-15-92 1:38p The file IBM1S506.ADD contains fix for this problem: During installation of OS/2 2.0 on family 1 computers, noise from MFM/RLL hardfiles and poor DASD performance exist. ******************************************************* Package Name - INSTALLB External Name - INSTB.ZIP (In Directory #17 on this BBS) A set of two diskette images that allows one to boot from an A: drive that is a 5 1/4" and use a set of OS/2 2.0 3 1/2" diskette in B: to install OS/2 2.0 ******************************************************* Package Name - VEMMGA (In Directory #17 on this BBS) A replacement VEMM.SYS driver that will allow OS/2 2.0 to see EMM memory that the GA code could not see when a program touched the memory before it called it. Lotus apps generally had this problem. ******************************************************** Package Name - REXX20 (In Directory #11 on this BBS) Latest version, dated 7/13/92. APAR PJ03945 APAR PJ04178 A set of 4 REXX files and a information TXT file that tells you how to install the fixes and more details on the fixes and APAR's. Additional Use samples included in REXX.TXT. ******************************************************** Package Name - MOUSE (In Directory #17 on this BBS) Fix for the 'Wild Mouse' and loss of mouse control. If you should lose the mouse, do not touch it for 15 seconds and it should resync. Copy over the existing MOUSE.SYS and reboot. ******************************************************** Package VBIOS.SYS (In Directory #17 on this BBS) VBIOS.SYS is a fix for these different problems: APAR PJ03709 Loading into UMB with OEM machines with Extended BIOS data APAR PJ03889 Running reboot vector on Model 40 causes hang APAR PJ03998 Running DOS HIMEM.SYS in VMBOOT on L40 SX and causing hang The biggest problem is APAR PJ03709. SYS3176 is common on OEM machines with Extended BIOS data area while loading into UMBs. This has been fixed. To replace, just copy over the file in \OS2\MDOS. No need to include in config.sys, since it is loaded automatically. ******************************************************** APAR PJ04220 NEC Turbo machines run slow Package name - TURBO (In Directory #17 on this BBS) TURBO.SYS is a fix for NEC machines with the TURBO option. Machines running slow need this OS/2 device driver in CONFIG.SYS to make it run in turbo mode. Putting it towards the top of CONFIG.SYS is best. ******************************************************** Replacement HP Laser Jet Windows drivers PACKAGE name - HPLJW (In Directory #17 on this BBS) See README file in ZIP for further details. This driver will print up to 6 times faster. ******************************************************** Collection of Problem Determination files PACKAGE name - INFTXT (In Directory #10 on this BBS) This is a collection of files used by support to help work known problems being reported by a user. ******************************************************* ************************ * Fixes on OS2TOOLS * ************************ |******************************************************* | |Package Name - REDBOOKS |EXTERNAL names - REDBK1.ZIP (All in Directory #15 on this BBS) | REDBK2.ZIP | REDBK3.ZIP | REDBK4.ZIP | |IBM Redbooks in INF format. | | REDBK1 - GG243730 - Vol. 1, Control Program | REDBK2 - GG243731 - Vol. 2, DOS and Windows Environment | REDBK3 - GG243732 - Vol. 3, PM and WPS | REDBK4 - GG243774 - Vol. 4, Application Development | |Full text and examples are include, and full IPF capabilities are enabled. | |UnZIP file and then VIEW GG2437xx.INF to use. | ******************************************************* Package Name - EPMBBS (In Directory #16 on this BBS) All ZIP files and EPMBBS.TXT (the README) are available externally Upgrade to EPM to take it to level 5.51 and ADD macro support. EPMBBS.TXT is basically the same as this text will some more info. This package consists of nine sets of files. You have the option of replacing your current Enhanced Editor (EPM 5.50) with EPM 5.51, or adding EPM 5.51 to your system so that you can use either version. If you elect to replace the current EPM, then you can unpack EPMAPPS.ZIP into your \os2\apps directory, and you can erase the ETKE550.DLL and ETKR550.DLL from your \os2\apps\dll directory. If you would rather keep both versions, then you can unpack EPMAPPS.ZIP into a new directory and either run EPM 5.51 from there, or ensure that your EPMPATH and PATH include that directory before \os2\apps when running EPM 5.51. The contents of the files in this package are as follows. You do not need to download or unpack all of them. EPMAPP.ZIP - Unpack into \os2\apps, or as described above EPM.EXE - The 5.51 version of the editor ETPM.EXE - The 5.51 version of the macro compiler PMMORE.EXE - Useful for debugging Rexx macros; entering RXSHELL from EPM will start PMMORE and redirect STDOUT to this window. SAY and TRACE output will be displayed there. *.EX - the 5.51 version of the compiled macros EPMHELP.QHL - the updated "quick help" file EPMTECH.NDX - An index file for getting macro programmer help. EPMBK.ZIP - Unpack into a directory in your BOOKSHELF setting EPMUSERS.INF - The EPM User's Guide EPMTECH.INF - The EPM Macro Programmer's Technical Reference EPMDLL.ZIP - Unpack into \os2\apps\dll or a directory in your LIBPATH ETK*551.DLL - The E Toolkit DLLs. EPMMAC.ZIP - Unpack into an E_MACROS directory and add to your EPMPATH. - This contains the macros used to build the standard .ex files. EPMHLP.ZIP - Updated EPM.HLP; unpack into \os2\help EPMSMP.ZIP - Unpack into a sampmacs directory and add to your EPMPATH. *.e - Sample E macro code; includes both useful programs and building blocks that you can use in writing your own code. EBOOKE.ZIP - Unpack into an EBOOKIE directory. EBookie is an EPM add-on that makes it much easier to create tagged source files. Support is included for Bookmaster, Starter Set GML, and IPF files (used to create OS/2 Help and View files). LAMPDQ.ZIP - Unpack; contains a file to be uploaded to the host. LAMPDQ lets you enter commands in EPM that will be executed on your (logged on) VM host session and see the results in EPM. Requires Communications Manager. EPMREX.ZIP - Unpack into a directory in your path. *.erx - contains some sample EPM / Rexx macros. The minimum you need in order to get EPM 5.51 is EPMAPPS and EPMDLL; add EPMHELP for the new help file. If you want to recompile the macros, you'll need E_MACROS, and probably EPMBOOK for the documentation. If you want to write your own macros, or if you just want to try some of the samples, get a copy of SAMPMACS. EBOOKIE and LAMPDQ are only for those who require their somewhat specialized functions. ******************************************************* Package Name - 2XMSE (In Directory #17 on this BBS) A replacement MOUSE.SYS that will speed up the ballistics of the mouse by two times approximately. Keep your old MOUSE.SYS around just in case you do NOT like it. This ONLY works for PS/2 style mice. ******************************************************* Package Name - ENDVDM (In Directory #10 on this BBS) This is a small DEBUG input file that will recreate a 7 byte program that will close either a DOS Session (same as entering EXIT) or close a Bootable VDM. This is the ONLY way to close a Bootable VDM. ******************************************************* Package Name - NETSRV (Not on this BBS right now) A fix for Novell Netware Lite 1.0. This will stop failures that kill a DOS session. ******************************************************* Package Name - PALETT (In Directory #17 on this BBS) This is a fix for LOTUS Freelance Palette problems. Some colors may not display properly without this fix. ****************************************************** Package Name - RESTKN (In Directory #17 on this BBS) A fix to allow you to RESET the T/R adapter while OS/2 2.0 is operational. ****************************************************** Package Name - GT16MB (In Directory #4 on this BBS) Updated 7/15/92 with more systems covered. This is a new OS2LDR file that enables machines with greater than 16 MB to use that memory (most clones had this problem). This fix is what we feel is a final fix. ******************************************************