Manual Install Instructions for Windows 2000
============================================
* Unzip the attached file to a floppy.
* Select the Add New Hardware icon in the control panel.
* Select the FWH device (the BIOS will need to enumerate this correctly to
make the FWH device appear here).
* Select have disk and insert the floppy with the unzipped files.
* Reboot the system.
* Run the self-test application to verify the driver is correctly installed.

Trouble Shooting
================
If the FWH was not detected, this may be due to the IFWH.INF file installed
by the chipset .INF's.  If this is the case, then renaming the IFWH.INF (to
IFWH.INX) prior to the manual install should allow the FWH to be detected
after install.