IBM ThinkPad R40 April 11, 2005 System Program Service Diskette Diskette Version : 1.23 BIOS Version : 1.23 (1OET57WW) ====================================================================== Notes: ------- This program is language independent and can be used with any language system. What This Diskette Does ----------------------- This System Program Service Diskette updates the system BIOS program stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following system: - ThinkPad R40 model 2681/2682/2683 To determine if you have to update the system program, refer to the Summary of Change section. To update the system program, refer to the Installation instructions section. Released Versions Description ----------------------- -------------------------------- 1.00 - 1.00 (1OET34WW) Initial Release 1.01 - 1.01 (1OET35WW) A problem fix 1.04 - 1.04 (1OET38WW) Problem fixes and function improvement 1.05 - 1.05 (1OET39WW) Problem fixes and function improvement 1.09 - 1.09 (1OET43WW) Problem fixes and function improvement 1.11 - 1.11 (1OET45WW) Problem fixes 1.12 - 1.12 (1OET46WW) Problem fixes 1.14 - 1.14 (1OET48WW) Problem fixes and function improvement 1.15 - 1.15 (1OET49WW) Function improvement 1.19 - 1.19 (1OET53WW) Function improvement 1.20 - 1.20 (1OET54WW) A problem fix 1.21 - 1.21 (1OET55WW) Function improvement 1.23 - 1.23 (1OET57WW) A problem fix Summary of Changes ------------------ Where: x.xx : Diskette version y.yy : BIOS version bbbbbbbb : BIOS internal ID For example, <1.00 - 1.00 (1OET34WW)> means the diskette version is 1.00 and the BIOS version is 1.00. The BIOS internal ID is for administrator purpose. (New) New Function or Enhancement (Fix) Correction to existing function <1.00 - 1.00 (1OET34WW)> -(New) Initial release for ThinkPad R40. <1.01 - 1.01 (1OET35WW)> -(Fix) When TCPA is enabled in BIOS setup, Rapid Restore PC(RRPC) process may not be completed and the system hung up with screen black out. <1.04 - 1.04 (1OET38WW)> -(New) New password beep tone support -(New) Linux ACPI support. -(New) Inhibited suspend/hibernation in PSA. -(Fix) (Windows XP) When LID is closed and opened after hibernation resume, screen might become blank. -(Fix) (Windows 2000) When HDD (Fujitsu-15L) is hot attached to 2nd HDD bay,the HDD might not be recognized. -(Fix) (Windows 2000/XP) When attaching a secondary HDD(Fujitsu-15L) on the system and then launch Access IBM Predesktop Area, an authentication error occurs. -(Fix) System did not boot up from IBM service partition even if pressing the F11 key in "Startup interrupt Menu" (Usability menu). -(Fix) LCD screen might have solid horizontal line. -(Fix) (Windows 98) Red error message appears when waking up from hibernation for the second time with the NEW 64Mb and 256MB USB Memory Key being hot attached/detached after the first wake up. -(Fix) When updating BIOS by IBM USB FDD(SONY), boot from FDD failed and OS bootup. -(Fix) After setting of password, POP(power on)/SVP(supervisor)/HDP(hard disk), if you try to modify the BIOS setup with IBM security chip enabled, the system hang up. <1.05 - 1.05 (1OET39WW)> -(New) CPU D1 stepping support was inplemented. -(New) Option ROM disable function was supported. -(Fix) Can not update flash ROM via RDM. -(Fix) Boot order of on board Either can not be changed to correct sequence. -(Fix) After shut down with screen expansion mode enabled, disable expansion mode in BIOS setup, and reboot the system with power on password entry,screen expansion mode is enabled even if disabled in BIOS setup. -(Fix) The password is asked at reboot after Bay HDD is hot attached. -(Fix) CMOS setting is changed after TV(DVI) only is selected. <1.09 - 1.09 (1OET43WW)> -(Fix) (Windows XP) Some multi-function type of CardBus cards may not work after resuming normal operation from standby mode. -(Fix) The boot order of network devices under Startup and Network in IBM BIOS Setup Utility becomes changed from default if the F9 key to load default configuration is pressed twice. -(Fix) The system may hang during system boot or may not be booted from the USB diskette drive if both a USB mouse and a USB diskette drive are attached to the computer. -(New) IBM Predesktop Area functionality update. -(Fix) IBM Predesktop Area setting was not copied by EEPROM over LAN. <1.11 - 1.11 (1OET45WW)> -(Fix) Preload recovery process from recovery CD may fail with some types of DVD/CD-RW drive. -(Fix) (Windows XP and Windows 2000) The system may resume from standby mode when the LID is opened even though "Do nothing" for [When LCD Close] is selected in the Power Options. <1.12 - 1.12 (1OET46WW)> -(Fix) System may stop during boot when BIOS is updated to 1.11(1OET45WW) and some CD Drive is attached. -(Fix) Internal Network Option ROM setting was not restored by Setup Automation Tool. <1.14 - 1.14 (1OET48WW)> - (New) Support for IBM Rescue and Recovery - (Fix) When Power On Password is the same as Hard Disk Password, the same password needed to be entered twice at power-on. <1.15 - 1.15 (1OET49WW)> - (New) CPU Microcode update. <1.19 - 1.19 (1OET53WW)> - (New) Add new items in IBM BIOS Setup Utility menu to support new function of handling password after Hibernation wakeup. ("Timer Wake with Battery Operation" in "Power", "Require password after hibernate" in "Security"->"Password") - (Fix) Brightness level of LCD may be changed after resuming from standby mode. <1.20 - 1.20 (1OET54WW)> - (Fix) The clock frequency (speed) of CPU is not set to the highest speed in battery mode even if "Intel(R) SpeedStep technology" option of "Power" of "Config" in the "IBM BIOS Setup Utility" menu is set to Enabled and its "Mode for Battery" option is set to "Maximum Performance". <1.21 - 1.21 (1OET55WW)> - (New) CPU Microcode update. <1.23 - 1.23 (1OET57WW)> - (Fix) When LCD brightness is set to max in BIOS setup menu, LCD brightness may be changed to low when AC adapter is detached (Battery operation). If you use Battery Maximizer to control LCD brightness, BIOS setting of LCD brightness is ignored. Installation instructions ------------------------- Notes: - You need an AC adapter and a charged battery pack to update the system program. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the write protected System Program Service Diskette into the diskette drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select Update system program and follow the instructions on the screen. Attention: Do not turn off or suspend the computer until the update has been completed. If you turn off or suspend the computer while the update is still in progress, the system board may have to be replaced. After the update has been completed, do the following to make the changes effective. 7. Make sure there is no diskette in the diskette drive, then turn on the computer. 8. While the Press F1 for IBM BIOS Setup Utility message is displayed at the lower-left area of the screen, press F1 key. The IBM BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 9. Verify the BIOS Version and date. BIOS information ---------------- Each version of the System Program Service Diskette contains the following system program (BIOS). The BIOS Version and the date can be viewed by running ThinkPad Configurator from your operating system and selecting the System Information button or by invoking IBM BIOS Setup Utility. 1. Make sure there is no diskette in the diskette drive, then turn off the computer. 2. Turn on the computer. 3. While the Press F1 for IBM BIOS Setup Utility message is displayed at the lower-left area of the screen, press F1 key. The IBM BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. The BIOS version and date are displayed on the first screen of the IBM BIOS Setup Utility. Diskette Version BIOS Version BIOS Date ---------------- ---------------- ------------------- 1.00 1.00 (1OET34WW) 2002-12-16 1.01 1.01 (1OET35WW) 2003-01-24 1.04 1.04 (1OET38WW) 2003-03-14 1.05 1.05 (1OET39WW) 2003-05-09 1.09 1.09 (1OET43WW) 2003-07-10 1.11 1.11 (1OET45WW) 2003-10-13 1.12 1.12 (1OET46WW) 2003-11-07 1.14 1.14 (1OET48WW) 2004-03-03 1.15 1.15 (1OET49WW) 2004-07-05 1.19 1.19 (1OET53WW) 2004-11-26 1.20 1.20 (1OET54WW) 2004-12-12 1.21 1.21 (1OET55WW) 2005-01-21 1.23 1.23 (1OET57WW) 2005-03-23 Memory Map Information ---------------------- The following information shows memory areas that are either unavailable or that can be included with a memory manager such as EMM386. Reserved BIOS Area: C0000-CFFFF (reserved for Video BIOS) D0000-D3FFF (reserved for Option ROM of Ethernet) DC000-DFFFF (reserved for USB BIOS) *1 E0000-FFFFF (reserved for BIOS) *1 : This area is free when USB BIOS is disabled. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.