3000 C100 March 30, 2006 BIOS Update Utility Disk space needed: 3.5MB Version 1.02F ====================================================================== Notes: ------- This program is language independent and can be used with any language system. What This Package Does ---------------------- This Lenovo BIOS Update Utility updates the BIOS (system program including the Embedded Controller(EC) program) stored in the Lenovo system to fix problems, add new functions, or expand functions as noted below. This release supports the following systems: - 3000 C100 The supported operating systems are as follows: - Windows 2000 - Windows XP (Service Pack 2) To determine if you should update the BIOS, refer to the Summary of Changes section. To update the BIOS, refer to the installation instructions section. Released Versions ----------------- Where: Utility Version - Description BIOS version (Internal ID), Embedded Controller Program version (Internal ID) Version 1.02F - Second release Version 1.01A - Initial release Summary of Changes ------------------ Where: : Utility version (New) New Function or Enhancement (Fix) Correction to existing function (BIOS) Modification in BIOS (EC) Modification in EC <1.02F> - (Fix) Using ThinkVantage Access Connections, sometimes the WLAN LED will not be lit up after after S4. - (BIOS) Removed Twin mode function after pressing Ctrl + Alt + F12. (Disable Twin mode function on DOS mode display device switch between LCD and CRT monitors only.) - (Fix) Fixed SMBIOS Version error issue. <1.01A> - (New) Support for the 3000 C100. Installation instructions ------------------------- Notes: - Remove the Power-on password prior to updating the BIOS in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the BIOS. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. - If a USB Diskette Drive is attached to your computer, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Start Windows 2000 or XP and logon with administrative privileges on the target computer. 4. Save this package onto the hard drive. 5. Click the Start button, then click Run... 6. Specify the file name with the full path name where you saved the package. (e.g. C:\DRIVERS\FLASH\60AF02US\InsydeFlash.exe) and then click OK. 7. Follow the instructions on the screen. After the update has been completed, the program shows a message 'Shut Down!' Press OK to restart the system. Do the following to make sure the BIOS is updated correctly. 8. Turn off the computer. 9. Turn on the computer. 10. While the "To interrupt normal startup, press the LenovoCare button" message is displayed at the lower-left area of the screen, press the F1 key. The Insyde Software SCU menu will be displayed. If a password prompt appears, type the correct password. 11. Verify the BIOS Version. 12. Turn off the computer. Trademarks ---------- * Lenovo is a registered trademark of Lenovo in the United States. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.