Display (Intel X3100) driver for Microsoft Windows XP 3000 N200(0687), V200 version 6.14.10.4785 Disk space needed: 42.5 MB Mar 2, 2007 ====================================================================== SYSTEM REQUIREMENTS AND PREREQUISITES ---------------------------------------------------------------------- This package requires the following additional package(s): None WHAT THIS PACKAGE DOES ---------------------------------------------------------------------- This package installs the software (display driver) to enable the following video chips on the system board. Video Chip Name Display device name in the Device Manager --------------- ---------------------------------------------- INTEL 965GM Mobile Intel(R) 965GM Express Chipset Family If the display driver has been installed, updating (overwrite- installing) the display driver will fix problems, add new functions, or expand functions as noted below. This program is language independent and can be used with any language system. Print this file so that you can refer to it during the installation. SYSTEMS SUPPORTED ---------------------------------------------------------------------- - 3000 N200(0687) - 3000 V200 RELEASED VERSIONS --------------------------------------------------------------------- Version 6.14.10.4785 Initial Release HISTORY OF CHANGES ---------------------------------------------------------------------- Where: < > Package version (New) New function or enhancement (Fix) Correction to existing function <6.14.10.4785> (New) Initial release for the 3000 V200 DETERMINING WHICH VERSION IS INSTALLED -------------------------------------------------------------------- 1. Click Start, right click My Computer, then click Properties. 2. Click the Hardware Tab, permit the DirectX Builder to run by clicking the Permit, then select Device manager. 3. Click Display adapters, then Double-click on the graphics controller shown. 4. Click the Driver tab and note the driver version. INSTALLATION INSTRUCTIONS -------------------------------------------------------------------- Notes: If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Version Information section. 1. Start Windows XP and logon with administrative privileges. 2. Double-click the driver package to extract it to your hard drive. The default location is C:\DRIVERS\WINXP\VIDEO 3. Click Start, then click Run... 4. Specify SETUP.EXE with the full path name where you extracted the package in step 2, and click OK. Example: C:\DRIVERS\WINXP\VIDEO\SETUP.EXE Note: For unattended install, specify "SETUP.EXE -S -SMS" with the full path name where you extracted the package in the step 2, and press Enter. 5. Follow the instructions on the screen. LIMITATIONS -------------------------------------------------------------------- NONE TRADEMARKS -------------------------------------------------------------------- * Lenovo is a registered trademark of Lenovo. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.