Help info for using this IBM 10/100 EtherJet PCI Adapters PXE 1.0 & RPL Option Utility diskette, ETPFLSH1.EXE v3.20 IF you have the new IBM 10/100 EtherJet PCI Management Adapter PN 34L1201, do not use this flash disk for flash update. Download ETPFLAS2.EXE v3.12 or later for the latest PXE 2.0 & RPL code. IF you have the IBM 10/100 EtherJet PCI Adapter with Wake on LAN PN 34L0201 FRU 30L5929 or an older model, you also should be using ETPFLASH.EXE v3.12. But, if you need to stay with PXE 1.0 for some reason, then use this ETPFLSH1.EXE disk. IF you have an older IBM 10/100 EtherJet PCI adapter, then you will need to buy an optional eprom option kit p/n 86H2856. Follow the directions in the manual that accompanies the option kit, or the adapter manual, for installing the rom module on your adapter. For these adapters, you also should be using ETPFLASH.EXE v3.12. But, again, use this ETPFLSH1.EXE v3.12 disk if you need to stay with PXE 1.0 for DHCP remote boot. INSTRUCTIONS: This flash diskette for the IBM 10/100 EtherJet PCI Adapters is a DOS bootable Flash diskette. To load, change, or update image in the flash module: 1) Place diskette in drive A: 2) Shutdown and reboot system 3) When prompted enter D for DHCP, R for RPL, E for Erase, C for Cancel Note: The PXE 1.0 DHCP Flash code in this diskette is LSA2 version 99N. IF you currently have LSA1 code, or an older version of LSA2 code in your adapter boot rom, and want to upgrade to LSA2 version 99N, then just simply select 'D'. The program will then remove current code and load the new code. Note: IBM Lan Client Control Manager LCCM v2.x is now available. LCCM v2.x supports both RPL remote boot or DHCP PXE remote boot option with IBM 10/100 EtherJet PCI adapters. LCCM v2.x is a push technology for true remote client boot from LCCM servers. To complement remote boot function, IBM Wake on LAN technology offers true Wake-up event to a fully powered down PC system (unlike some other WoL technologies that can only restart a PC system from a suspend mode). Together with Wake on LAN + remote boot options from IBM 10/100 EtherJet PCI Adapters, LCCM v2.x will provide the most advanced, comprehensive, and flexible technology to date for campus or enterprise-wide remote client management. Now, with IBM LCCM v2.x, users can remotely turn on a PC system, then have it remotely boot up to a server, with the choice of either RPL boot or DHCP PXE boot. For the new 34L1201 FRU 34L1209 adapter, look for the new IBM LCCM 3.x release. * Third-party trademarks are the property of their respective owners