-----------------------------------------------------------------------------
        STRMRLOG   Vital Product Data And Error Log Dump   VERSION 1.02
-----------------------------------------------------------------------------


**** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ****
****                                                                     ****
****    OPERATE THIS ROUTING ONLY FROM DOS.                              ****
****    DOS/WINDOWS AND OS/2 CAN PRODUCE UNPREDICTABLE RESULTS.          ****
****                                                                     ****
****    DOES NOT YET SUPPORT THE TRIPLE LANSTREAMER PCI ADAPTER.         ****
****    DO NOT USE THIS ROUTINE WITH A TRIPLE LANSTREAMER PCI INSTALLED. ****
****                                                                     ****
**** WARNING *** WARNING *** WARNING *** WARNING *** WARNING *** WARNING ****


SUPPORTED ADAPTERS:
-------------------

      - IBM Auto LANStreamer MC 32
      - IBM Dual LANStreamer MC 32
      - IBM EtherStreamer MC 32
      - IBM Dual EtherStreamer MC 32
      - IBM Auto LANStreamer PCI

INSTRUCTIONS:
-------------
   1. If your Streamer adapter is not yet configured in the machine,
      use the Adapter Option diskette and Installation instructions
      (shipped with the adapter) to configure the adapter.

   2. If you have a Dual LANStreamer or Dual EtherStreamer adapter, you
      must first edit the CONFIG.SYS file on this diskette. For each
      dual adapter, you must have a DEVICE=A:\DUALSTRM.DOS statement with
      the appropriate slot designation (for example /S:3 for slot 3).

   3. Place this diskette into your bootable diskette drive (must support
      1.44 MB diskettes) and initiate system startup (either Power-on or
      CTRL-ALT-DEL Reboot).  The diskette will automatically perform the
      logging and notify you when complete.

   4. If your system is not set up to check for a bootable diskette in the
      floppy drive, you may run the update from the command prompt.

      *** MAKE SURE THAT YOUR LAN CONNECTION IS NOT OPERATIONAL BEFORE   ***
      *** RUNNING THE UTILITY.  INDETERMINATE RESULTS WILL OCCUR IF YOUR ***
      *** STREAMER ADAPTER IS SUCCESSFULLY ATTACHED TO A NETWORK.        ***

        - From a DOS 5.0 or later command prompt, perform the following:

            > Put this diskette in your A: designated diskette drive
              (diskette drive must be capable of supporting a 1.44 MB
              diskette).

            > Enter A:

            > Enter AUTOEXEC to initiate the logging.

            > Remove diskette and reboot after the operation is complete.

   5. If the level of microcode on an adapter is the most recent, you will
      be asked if you want to bypass the update for the adapter.

   6. A file named STREAMER.LOG will be created on the diskette. Return
      this file to IBM LAN Support for analysis.


TROUBLESHOOTING:
----------------
 - In the event of a failure, i.e. a power outage, reboot this diskette.



IBM is a trademark of IBM, Inc.
Streamer is a trademark of IBM, Inc.