8285plus.txt file:

March 18th, 1997

         [C]  Copyright IBM Corp.  1996, 1997
                   All rights reserved

              US Government Users Restricted Rights -
              Use, duplication or disclosure restricted by
              GSA ADP Schedule Contract with IBM Corp.


THIS CONCERNS the following :   8285 

                    PRE-REQUISITE: ALL YOUR 8285 ATM COMPONENTS MUST BE
                                   AT LEAST AT THESE FOLLOWING LEVELS,
                                   BEFORE THE INSTALLATION OF THIS VERSION :
                                   - A-CPSW     : operational V.1.0.0
                                                  boot        V.1.0.0 co-req
                                                  FPGA        1       co-req
                                   - A4-FB100:  FPGA     8         "
                                   - A4-SC100:  FPGA     8         "
                                   - A2-MB155:  FPGA     81        "

                        If the ATM Media modules are not at the requested
                        FPGA level, contact your IBM representative, with the
                        reference: 51H4282, to get an upgrade package.
                        The upgrade packages can also be obtained
                        from Internet at URL
                        http://www.raleigh.ibm.com/82a/82afix.html


WARNING:
   ****  FIRST ****  read CAREFULLY the INSTALLATION INSTRUCTIONS :

Code Version : Operational V.1.5.1
               Boot        V.1.5.0
               FPGA        C30

   read also CAREFULLY the associated RELEASE NOTE
-----------------------------------------------------------
 Following is the content of the 8285PLUS.ZIP file:

*)8285PLUS.TXT: This file

*)REL8285.PS: Release note for 8285 in PostScript (binary)

*)INST8285.PS: Installation instructions for 8285 in PostScript (binary)

*) D10J2435 (PN 10J2435, diskette 1 of 5) :

   - README.285    Notice file for 8285
   - BOOT150.BIN   8285 BOOT microcode v.1.5.0 (166140 bytes) (binary)
   - OPER151.BIN   8285 OPERATIONAL microcode v.1.5.1 (937918 bytes) (binary)
   - REL8285.DOC   Release note for 8285 (ascii)
   - INST8285.DOC  Installation Instructions for 8285 (ascii)


*) D10J2436 (PN 10J2436, diskette 2 of 5):

   - swpgab50.enc  8260 A-CPSW FPGA picocode (524296 bytes)
   - 85pgac30.enc  8285 base FPGA picocode (524296 bytes)
   - MIB1.7        MIB 1.7 (166307 bytes)


*) D10J2437 (PN 10J2437, diskette 3 of 5):

   - 100mc50.enc  HS100Mbps MIC connector FPGA picocode (524296 bytes)
   - 100sc50.enc  HS100Mbps SC connector FPGA picocode (524296 bytes)


*) D10J2438 (PN 10J2438, diskette 4 of 5):

   - 1552p50.enc  HS155Mbps 2 ports FPGA picocode (524296 bytes)
   - 1553p31.enc  HS155Mbps 3 ports FPGA picocode (524296 bytes)


*) D10J2439 (PN 10J2439, diskette 5 of 5):

   - cmpga50.enc  Carrier Module FPGA picocode (524296 bytes)
                  This concerns the following ATM modules :
                      A-CMU1, A-CMU2     ATM Carrier Module
                      A04MB-BRG :        ATM/LAN Bridge Module
                      A-MSS :            Multiprotocol Switch Services (MSS) Server Module
                      A2-WAN :           ATM WAN Module

   - 25pga30.enc  12 port 25 Mbps module FPGA picocode (524296 bytes)

-----------------------------------------------------------------------------------------------------------------------------------------------------
o Total package size : 3.1 Mbytes