Windows NT 4.0 1. Start Windows NT 4.0. 2. Click Start, click Settings and click Control Panel. 3. Double-click the Network icon. 4. If this is the first time to configure the Network, it will display the Network Configuration dialog box, then proceed to the next step. If not, go to step 14. (First Network Configuration) 5. Click the Yes button. 6. Select Wired to the network. 7. Click the Next button. 8. Click the Select from list... button. 9. Click the Have Disk.. button. 10. Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. Default C:\DRIVERS\WLLANPHL\NT 11. Click the OK button. 12. Select IBM A/B/G 11 Wireless LAN Mini-PCI Adapter. 13. Follow the instructions that follows and reboot the system. (Add Ethernet to Network Configuration) 14. Click the Adapters tab. 15. Click the Add... button. 16. Click the Have Disk... button. 17. Type the path to the directory that contains the OEMSETUP.inf file in Insert Disk dialog box. Default C:\DRIVERS\WLLANPHL\NT 18. Click the OK button. 19. Select IBM A/B/G 11 Wireless LAN Mini-PCI Adapter. 20. Click the OK button. 21. Click the Close button. 22. Follow the instructions displayed on the screen. 23. Click Yes when prompted to restart the computer. Configuration Utility Installation Instructions ----------------------------------------------- Windows NT 4.0 1. Install configuration Utility by clicking Run then enter: Setup.exe location then click "OK" and follow the instructions. Default location C:\DRIVERS\WLLANPHL\NT\Utility