SCSK2SP1.TXT This is the readme file for SCSK2SP1.EXE. This update is for users who have version 2.0 of the SCSK running Win NT 4.0. You can check the version of your SCSK software by looking at the label on your installation CD. If you are using version 1.0 or 1.1, please contact the IBM PC Helpcenter for information on upgrading to the 2.0 version. Symptom: There have been some cases where users running Win NT 4.0 and using a PCMCIA Lan Adapter have been unable to get the Smart Card Reader identified by the system. This is due to an address conflict between the Lan card and the SC Reader. Installation: To install this patch, download it to your hard drive (the file is small enough to fit on a single diskette if you do not have internet access on the system the kit is used with) and then run the file SCSK2SP1.EXE. Note: If you are running an operating system other than Win NT 4.0 or the patch has already been applied, you will receive a message that the update is not required. When you are finished, you will want to keep a copy of this in case you have to reload your 2.0 software.