Keylock Login program Upgrade Instructions NOTE: You can use the latest Keylock Login# directly if you haven't use a previous version of Keylock Login* with your memory key, but if you've used a previous version Keylock Login* please follow the following instruction to upgrade to the latest Keylock login#. - Procedure : 1. Before performing the update, please make sure you have downloaded the latest Keylock Login# and Keylock User Setup##. 2. Login to the Secure Area of the memory key with the previous version Keylock Login*. 3. Backup any data in the Secure Area to your computer hard disk. 4. Set the Secure Area size to "0" with the previous version of Keylock Login*. 5. Replace the previous version of Keylock login* on the memory key with the latest version Keylock Login#. 6. Unplug the memory key. 7. Run the latest Keylock User Setup## by double-clicking on the file. 8. Select "Uninstall" to remove the previous version Keylock program, and reboot the computer. 9. After reboot, re-insert memory key into the computer and run the latest Keylock User Setup## again. 10. Select "Install" to install the latest version Keylock program, and reboot the computer. 11. Upgrade complete. Remark : * - previous version Keylock Login includes V1.0.0.13 / V1.0.0.15 / V1.0.0.16 / V1.0.0.17 / V1.0.0.18 / V1.0.0.19 ** - previous version Keylock User Setup includes V1.0.0.2 / V1.0.0.5 / V1.0.0.6 / V1.0.0.7 # - latest version Keylock Login is V1.0.0.20 ## - latest version Keylock User Setup is V1.0.0.8