Drivers/Client tools for IBM High Rate Wireless LAN PC Card (P/N 09N9863, 09N9904, and 09N9906) for Windows 95. File Contents: --------------- This self-extracting EXE file contains the client software, drivers, and firmware for the IBM High Rate Wireless LAN PC Card. Installation Instructions: --------------- 1. Use Windows Explore to find the win95wl.exe file that was downloaded and double click on it. A PKSFX Extraction window will appear. Click on the "Extract" button. NOTE (If a window "Create C:\wlan directory?" appears, Click Yes). C:\wlan is the default directory that the file will extract itself into. If you chose to extract to another directory, use that directory in the following instructions instead of "C:\wlan". NEW INSTALLATION OF CLIENT MANAGER INSTRUCTIONS: a) Click "START" > "RUN". b) Enter "C:\wlan\setup.exe" c) Click "OK". d) Follow the on-screen instructions. UPGRADE EXISTING CLIENT MANAGER INSTRUCTIONS: a) Click "START" > "SETTINGS" > "CONTROL PANEL" b) Double-click on "Add-Remove Programs" c) Click on "IBM Client Manager" d) Click on "Remove" e) Perform the NEW INSTALLATION OF CLIENT MANAGER instructions above. NEW INSTALLATION OF IBM WIRELESS LAN PC CARD AND DRIVERS: NOTE: The Client Manager Software must be installed prior to the PC Card and driver installation. a) Insert the IBM High Rate Wireless LAN PC Card into the laptop. This should automatically start update Device Driver Wizard. Click "Next", Please wait for the next window to appear. (If system is a Thinkpad 600, Select Have Diskette provided by card manufacture, Click OK. Disk Install window appears, enter C:\WLAN, then Click OK. Continue installation at step (d) b) Select "Other Locations" c) In Location Box, type "C:\wlan", Click 'OK, Click "Finish" d) Insert Disk window appears. Click "OK" e) Copying files window appears, Enter C:\WLAN, click "OK" f) Set up file error window appears. Click "OK" g) Set up file error window appears. Click "OK" h) Insert Disk window appears. Click "OK" i) Set up file error window appears. Click "OK" j) Set up file error window appears. Click "OK" k) Copying files window appears, Enter C:\windows, click "OK" l) Copying files window appears, Enter C:\windows\system, click "OK" m) Copying files window appears, Enter C:\windows, click "OK" n) Version conflict window appears, Click Yes. o) After Installation is complete, Click "Start", Click "Settings", Click "Control Panel". p) In Control Panel, Double Click "Wireless Network" icon. q) An "Add/Edit Configuration Profile" window will appear 1) Click on "Edit Profile" button. 2) Enter a network name in the "Basic" tab. (Please see your system administrator for a network name) 3) Click "OK", Click "OK" r) Restart your computer. s) After your computer restarts, complete network setup. ( See your system administrator for information) TO UPGRADE THE DRIVERS FOR A CARD YOU HAVE ALREADY INSTALLED: a) Click "START" > "SETTINGS" > "CONTROL PANEL" b) Double-click on "System" c) Click "Device Manager" d) Double-click on "Network Adapters" e) Double-click on "IBM High Rate Wireless LAN PC card" f) Click on "Driver" tab. g) Click the "Update Driver" button. h) Click the "Next" button. i) Click on "No, Select Driver from list" radio button. j) Click the "Next" button. k) Click the "Have Disk" button. l) Enter "C:\wlan\win_95". m) Click on "OK" n) Follow the on-screen instructions. o) Note: You may see an error message, " The Client Manager is not installed" If the client manager is already installed, you may ignore this message by clicking "OK". p) When "IBM High Rate Wireless LAN PC Card Properties" window re-appears, driver is installed. TO UPGRADE YOUR FIRMWARE: a) Click "START" > "RUN" b) Enter "C:\wlan\wsu10616.exe" c) Click "OK" d) Follow the on-screen instructions. If you have any further questions, you can download complete documentation at http://www.pc.ibm.com/support.