Windows NT 4.0 Video Device Driver for S3 chipsets.
                           Version 3.29.10


  CONTENTS
  ________
	   1.0 Installation Procedure
           2.0 Trademarks


 1.0  Installation Procedure
  __________________________

  1.  Start system with Windows NT 4.0 installed.
  2.  IMPORTANT: When the "Please select the operating system to start..."
      message is displayed, select
      "Windows NT Server Version 4.00 [VGA mode]".
  3.  From "Start", select the "Settings group", then click on the
      "Control Panel" icon.
  4.  In the "Control Panel", double click on the "Display" icon.
  5.  In the "Settings" screen, click on the "Display Type..." button.
  6.  From the "Display Type" screen, and in the "Adapter Type" section,
      click on the "Change..." button.
  7.  In the "Change Display" screen, click on the "Have Disk..." button.
  8.  Insert the new display driver diskette into the A:\ drive, then click
      on the "OK" button.
  9.  From the list of displayed S3 devices, select your S3 device.
  10. From "Third-party Drivers", click on the "Yes" button to proceed.
  11. If a message appears stating the driver is already installed on the
      system, and asks if you want to use the current or new drivers, be
      sure to select the "New" button.
  12. If prompted for the driver diskette a second time, click on the
      "Continue" button.
  13. When the message "The drivers were successfully installed" is
      displayed, remove the display driver diskette, then click on the
      "OK" button.
  14. Back at the "Display Type" window, click on the "Close" button.
  15. Back at the "Display Properties" window, click on the "Close" button.
  16. When you see the "System Settings Change" window, asking if you wish
      to restart your computer, click on the "Yes" window to reboot now.

 o NOTE:  If installing Windows NT 4.00 with the S3 device currently
          installed in the system:

    Proceed through the Windows NT installation as normal.  The
    installation program will prompt the user to choose a display mode.
    Choose the "Cancel" button from the "Display Settings" screen to ignore
    this step for now.  The installation will now finish.  Once Windows NT
    has started for the first time, proceed to follow the steps outlined
    above to install the driver for your S3 device.



 2.0  Trademarks
  ______________

  The following terms are trademarks of other companies:

     TRADEMARK                OWNER

     S3                       S3 Incorporated

     Windows                  Microsoft Corporation

     Windows NT               Microsoft Corporation



  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT
  LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
  MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT.  BY
  FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY RELATED PATENTS OR
  COPYRIGHTS.
  THIS DRIVER IS COPYRIGHTED BY INTERNATIONAL BUSINESS MACHINES CORPORATION.
  ALL APPROPRIATE RESTRICTIONS APPLY.

                                (End of Document)