IBM Netfinity 5500 POST/BIOS Flash Diskette Version 1.00 Installation README File This README file contains the latest information about installing the IBM Netfinity 5500 Diagnostics. CONTENTS ________ 1.0 Updating IBM Netfinity 5500 POST/BIOS 2.0 Version Changes 3.0 Trademarks and Notices 1.0 Updating IBM Netfinity 5500 POST/BIOS ______________________________________________ The procedure to update the POST/BIOS is as follows: 1. Insert the "IBM Netfinity 5500 POST/BIOS Flash Diskette" into drive A. 2. Start up or restart your IBM Netfinity 5500 server. 3. The system will boot off of the diskette and present a window which allows you the option to flash various options. Choose "1 - Update POST/BIOS". Then choose the number for the language you wish to use during POST and in Setup. 4. After the images are loaded from diskette, you will be asked if you would like to move the current POST/BIOS image to the backup ROM location. If you select 'Y', the current code will be flashed in to the backup bank immediately. 5. After that selection completes, you will be asked if you would like to save the current code to a diskette. If you select 'Y', you need to have a formatted diskette already available. 6. After this completes the system will update the flash ROM with the new code. When this is complete you will be prompted to remove the diskette and hit return to reboot the system. 2.0 Version Changes ____________________ Version Changes ------- ------------------------ 1.00 First release - BIOS level 0. 3.0 Trademarks and Notices ___________________________ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.