IBM xSeries 360 POST/BIOS ASM Remote Flash Update Version 1.02 Installation README File CONTENTS ________ 1.0 Overview 2.0 Change History 3.0 Installation and Setup Instructions 4.0 Unattended Mode 5.0 Web Sites and Support Phone Number 6.0 Trademarks and Notices 7.0 Disclaimer 1.0 Overview 1.1 This README file contains the latest information about installing the IBM xSeries 360 POST/BIOS remotely. Before performing the remote flash update you must follow the update procedure noted in the Dependencies section. 1.2 Limitations - NA 1.3 Enhancements - This version of POST/BIOS supports IBM xSeries 360 system with or without the IBM RXE-100 Remote Expansion Enclosure. 1.4 Dependencies IBM xSeries 360 BIOS level must be at least v1.02 to update POST/BIOS flash remotely. 2.0 Change History V1.02 - March 29, 2002 ------------------------- - Integrated code to support the attachment of "IBM RXE-100 Remote Expansion Enclosure". - Fixed the problem of "IBM xSeries 360 diagnostics" unable to obtain the status of RXE through service processor. - Fixed ROM scan problem of QLogic SCSI adapter installed in RXE. - Fixed the problem of adapter unable to be recognized in "Windows.NET server" operating system when the adapter is hot-removed and then hot-added. - Fixed message displayed for changed field replaceable unit (FRU) in RXE. - Changed the 'year' field of copyright message to 2002. - Changed the remote flash update utility to support the method of virtual disk. If system is installed with BIOS V1.02 (or above), only packet file(s) for BIOS V1.02 (or above) can be used. If system is installed with BIOS 1.01 (or below), only packet file(s) for BIOS V1.01 (or below) can be used. It should be noted that this change has no impact on "diskette flash update" or "eflash update". - Fixed Linux system hang during boot when remote video console is used. - Added PCI(x)-PCI(x) bridge support at boot time. - Corrected some data for SMBIOS. V1.01 - December 19, 2001 ------------------------- - Added a code to fix occurrence of IERRs during reboot test due to RIOG timeout. - Fixed SMBIOS structure to display proper processor cache size. - OS will now display the same BIOS version as POST. - Flask diskette attributes now being set properly. - Added a workaround to fix Foster errata which can cause invalid processor machine check. - Fixed several setup help related problem. - Added a BIOS check for installed adapters with onboard PCI-X. - Added a Enhancement to proc. MCK initialization requirement by Intel. - Removed CP 50 and log error for SPINT clear failure. V1.00 - November 07, 2001 ------------------------- - Initial release 3.0 Installation and Setup Instructions Complete the following steps to update the POST/BIOS remotely: 3.1 Download the "IBM eserver xSeries 360 remote flash BIOS update", file xxxx.exe (executable file, accompanying this README file) from the World Wide Web to the hard drive. 3.2 Double-click the icon to open a DOS window. Follow the instructions displayed on the screen. At the completion of the instructions you will be prompted to insert a blank diskette in drive A and press "Enter". 3.3 Open an Internet browser. 3.4 Enter the hostname or IP address for the Advanced System Management Ethernet interface as the URL and press "Enter". 3.5 Enter "USERID" (all upper case) for user name. Enter "PASSW0RD" (all upper case, with a zero "0" not an "O") and click "OK". 3.6 Change the session timeout value to 20 minutes and click "Continue". 3.7 In the left panel, under Tasks, click "Firmware Update". 3.8 Click "Browse", navigate to drive A. Select "xxxx.pkt", click "Open", and Then click "Update". 3.9 Click "Continue" to Confirm Firmware Update. 3.10 When the message "Update of BIOS (I32) firmware was successful" displays, click "Logoff". 4.0 Unattended Mode NOTE: This section is for Advanced Users. It describes how to perform unattended flash updates for English only. For all other languages use the procedure in step 3.0. 4.1 Steps for unattended mode. 4.1.1 "shell=flash2.exe" is the content of the config.sys file on the flash diskette. Modify this entry as shown to perform the unattended flash update operation. shell=flash2.exe /u /r 4.1.2 Insert the flash diskette in drive A and start (or restart) the server. 4.1.3 Remove the diskette when the IBM eserver logo screen is displayed at the next reboot. 5.0 Unattended Mode - NA 6.0 Trademarks and Notices 6.1 IBM is a registered trademark of International Business Machines Corporation. 6.2 Intel is a registered trademark and Pentium is a registered trademark of Intel Corporation. 6.3 Microsoft is a registered trademark and Windows NT, and Windows, are trademarks of Microsoft Corporation. 6.4 Novell and NetWare are registered trademarks of Novell Inc. 6.5 SCO, SCO UNIX, Open Desktop, and Open Server are registered trademarks of Santa Cruz Operation Inc. 6.6 All other trademarks are the properties of their respective owners. 7.0 Disclaimer THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.