BIOS Upgrade Instructions
-------------------------

Upgrading to the Latest BIOS
-----------------------------------
1.  Be sure you have the correct BIOS file.

2.  Make sure you have recorded any Setup or SCU changes you may 
    have made before you do the BIOS update.  

2.  Place the bootable floppy containing the BIOS into drive  A:
    of the system that you want to upgrade and boot the system 
    while the floppy diskette is in the drive.  

3.  The system will boot to a list of options; 1, 2, and 3.  
    Choose 1 to update the system BIOS only.  Choose 2 for an 
    interactive version of the BIOS update utility.  Choose 
    option 3 to update the system along with the SCSI tables.  
    Option 3 is the recommended option for most customers.  

4.  Choose "yes" to clear the error log when given this option.

5.  Once the BIOS has been successfully loaded, remove the 
    floppy diskette from the drive.  The system will 
    automatically reboot when the update has completed.  

6.  Check to make sure the BIOS version is the new version as the 
    system reboots and press F1 to enter setup.  When in setup 
    press F5 to load defaults.  While in setup restore any 
    settings that you made prior to the BIOS update.  Save and 
    exit.  The system will reboot.  

7.  You should run the System Configuration Utility and save your 
    configuration if you had previously used the SCU to set 
    values.