IBM Netfinity 4000R POST/BIOS Flash Disk Version 1.01 Installation README File This README file contains the latest information about installing the IBM Netfinity 4000R POST/BIOS. CONTENTS ________ 1.0 Updating IBM Netfinity 4000R POST/BIOS 2.0 Version Changes 3.0 Trademarks and Notices 1.0 Updating IBM Netfinity 4000R POST/BIOS ______________________________________________ The procedure to update the POST/BIOS is as follows: 1. Insert the "IBM Netfinity 4000R POST/BIOS Flash CD" into the drive. 2. Start up or restart your IBM Netfinity 4000R server. 3. The system will boot off of the disk and present a window which allows you the option to flash various options. Choose "1 - Update POST/BIOS". 4. You will then be asked if you would like to save the current code to a disk. If you select 'Y', you need to have a FAT formatted hard disk already available. 5. At this point, the image will be loaded from the disk, and you will be asked to choose which language you wish to use during POST and in Setup. If you select a choice other than English, the selected language will be merged into the image. There is also an option to Quit the flash update on this menu. 6. After this completes the system will update the flash ROM with the new code. When this is complete you will be prompted to remove the disk and hit return to reboot the system. 2.0 Version Changes ____________________ 1.01 First release - BIOS level 2. - Add support for large IDE hard drives. ------- ------------------------ 1.00 First release - BIOS level 1. 3.0 Trademarks and Notices ___________________________ THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS.