H132792 - COM 2 Missing from TranXit Configuration Menu SYMPTOM: When loading the TranXit software for Windows95 that provides infrared support, COM 2 is not present on the Configuration Menu. PROBLEM ISOLATION AIDS: This problem only affects IBM PC 700 Series 6877 or 6887 systems with Windows95 and an Infrared Transceiver (Dongle) option installed. This option allows communications between two systems via infrared transceiver. The PC 700 6877 and 6887 contain an infrared adapter port on the system board, accessed from the rear of the system. FIX: Before installing the TranXit software package, ensure that the latest Infrared Data Association (IrDA) device drivers for Windows95 are installed. Driver updates may be obtained from the Microsoft Windows95 Service Pak Web site at: http://www.microsoft.com/windows/servpak1.sphome.htm Choose the "Information System Professionals" section. After installing the latest level driver, perform the following steps: - Boot Windows95 and click on "START." - Click on "SETTINGS." - Click on "CONTROL PANEL." - Double click on the Infrared Icon. - Click on "Options." - Remove the checkmark on "Enable Infrared Communication." - Click on "Apply" and "OK" to close the window. The TranXit software may be installed Windows95 is a trademark of the Microsoft Corporation. TranXit is a trademark of PUMA, Inc.