H135198 - 32-Bit Disk Access Errors w/CDROM Installed SYMPTOM: IBM PC 700 Series 6877 & 6887 systems may exhibit random 32-Bit Disk Access errors using Microsoft Windows for Workgroups 3.11 with a CDROM drive installed. PROBLEM ISOLATION AIDS: The drive configuration of the 6877/6887 consists of an IDE hardfile on the Primary port as MASTER and an IDE CDROM drive on the Primary port as SLAVE. No other drives installed. When 32-Bit Disk Access is enabled in Windows for Workgroups, and commands are sent to the IDE hardfile, the CDROM drive may attempt to respond, causing 32-Bit Access errors. FIX: Disable Windows for Workgroups 32-Bit Disk Access. - OR - Remove the CDROM drive from the Primary IDE port connector and install it on the Secondary IDE connector on the system board. Set the jumper on the IDE CDROM for MASTER. Windows & Windows for Workgroups are trademarks of the Microsoft Corporation.